Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 Data Sheet
Product codes
1726 502
3
UsbCom Standard / Professional 2.1
©
Software
UsbCom Standard / Professional 2.1
©
Introduction
With the UsbCom Standard Software in conjunction with a measuring instrument with a data output; MultiCom,
DataVariable or MarConnect and the appropraite data cable you can transfer your measured values into a text file,
into Microsoft Excel or via a keyboard code into any application. In addition to a USB port it is also possible to use a
serial COM interface with the suitable data cable for data transmission.
DataVariable or MarConnect and the appropraite data cable you can transfer your measured values into a text file,
into Microsoft Excel or via a keyboard code into any application. In addition to a USB port it is also possible to use a
serial COM interface with the suitable data cable for data transmission.
With the UsbCom Professional Software full version (optional), you can operate up to 127 measuring devices
(subtract the amount of hubs being used) via the USB hubs and one additional serial COM interface, thus you
can easily centralize multiple measuring devices to one measurement station. With the aid of a USB foot switch
(optional) you can also transfer your measured values from each individual measuring devices to a text file, forms
or to separate MS Excel columns.
(subtract the amount of hubs being used) via the USB hubs and one additional serial COM interface, thus you
can easily centralize multiple measuring devices to one measurement station. With the aid of a USB foot switch
(optional) you can also transfer your measured values from each individual measuring devices to a text file, forms
or to separate MS Excel columns.
Note: When connecting several USB hubs together (for example when cascading) these must be operated by an
external power supply.
external power supply.
Please read the following instructions carefully so that you are familiar with the UsbCom Software.
Installation
In order to start the installation of the UsbComSoftware, please execute either the SetUp-MarComStd.exe or
SetUp-MarComProf.exe file in the root directory of this CD and follow the instructions. Once successfully installed
you may plug in the USB cable and continue with the installation of the driver. If you wish to connect multiple USB
data cables (only possible with the full version of UsbCom Professional) we recommend that you install the cable
and driver successively. A brief guide to getting started can be found in CD box, a PDF instruction manual can also
be found on this CD.
SetUp-MarComProf.exe file in the root directory of this CD and follow the instructions. Once successfully installed
you may plug in the USB cable and continue with the installation of the driver. If you wish to connect multiple USB
data cables (only possible with the full version of UsbCom Professional) we recommend that you install the cable
and driver successively. A brief guide to getting started can be found in CD box, a PDF instruction manual can also
be found on this CD.
Minimum system requirements:
• DVD or CD drive
• MS Windows 7, Vista, XP oder 2000
• One free USB-interface 1.1 or higher
• Up to 10 MB of available hard disk space
• Recommended: MS-Excel 97 or higher
• MS Windows 7, Vista, XP oder 2000
• One free USB-interface 1.1 or higher
• Up to 10 MB of available hard disk space
• Recommended: MS-Excel 97 or higher