Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 Data Sheet

4

 UsbCom Standard / Professional 2.1

©

 Software



After starting the program a status window will appear.
In this status window you can instantly see whether a measuring device has been connected and recognized (a 
colour signal field in the top right hand corner of the window) as well as the last transferred measured value will 
appear.
This window must always be open so that the measured values can be transferred to a text file, into Microsoft Excel 
or via a keyboard code!

With a double click upon the status window the configuration window will then open.

In this configuration window the connected measuring devices will be displayed and configured. Normally, after the 
first installation only the free serial COM interface will be shown, as long as the computer being used has further 
COM interfaces.

Now, you can plug in the USB data cable, please follow the instructions regarding the driver installation contained 
in the brief guide. Once the driver is successfully installed, the new connected measuring device will appear in the 
configuration window. With multiple USB data cables repeat these steps accordingly (with UsbCom Professional 
only).

When the driver installation of the data cable is successfully installed, the new measuring device will appear in 
the configuration window, along with the description of the connected USB data cable and a description of the 
measuring device. In order to activate the new data cable go to the Measuring Instruments menu and select 
Refresh. The connected measuring device can be edited.