Atmel Evaluation Kit AT91SAM9X35-EK AT91SAM9X35-EK Data Sheet

1280

SAM9X35 [DATASHEET]

11055E–ATARM–10-Mar-2014

In the tables that follow, the most recent version of the document appears first.

General editorial and formatting changes throughout document
Updated first line of document title on 

 (was “AT91SAM ARM-based Embedded MPU”; is “ARM-based Embedded 

MPU”)

: flipped diagram right for ease of viewing

:

- GPIO:  replaced “All PIO lines except the following” with “All PIO lines except GPIO_CLK, GPIO_CLK2, and GPIO_ANA”
- EBI:  replaced “All Data lines (Input/output) except the following” with “All data lines (Input/output)”
- EBI_O:  replaced “All Address and control lines (output only) except the following” with “All address and control lines 
(output only) except EBI_CLK”

: removed “PU” reset state for SHDN signal

: in VDDNF “Powers” description, replaced instance of “D16-D32” with “D16–D31”

: replaced “SCKCR” with “SCKC_CR”; replaced “BSCR” with “BSC_CR”

: replaced “SCKCR” with “SCKC_CR”; replaced “BSCR” with 

“BSC_CR”

: replaced bullet “Slow Clock Control Register (SCKCR)” with “Slow Clock Controller 

Configuration Register (SCKC_CR)”; corrected instance of “BSCR” to “BSC_CR”