Atmel ARM-Based Evaluation Kit AT91SAM9N12-EK AT91SAM9N12-EK Data Sheet

Product codes

AT91SAM9N12-EK

1094

SAM9N12/SAM9CN11/SAM9CN12 [DATASHEET]

11063K–ATARM–05-Nov-13

UDP:

Section 33.4 “Product Dependencies”

, second paragraph removed.

Section 33.5 “Typical Connection”

, revised schematic and VBUS Monitoring.

Section 33.6.3.2 “Entering Attached State”

, revised, replaced paragraphs before Warning.

Section 33.7.12 “UDP Transceiver Control Register”

, bit field 9 is dedicated to PUON.

7322

UHP:

Section 34-1 “Block Diagram”

, removed Warning.

Section 34.6 “Typical Connection”

, revised schematic and text.

7322

USART:

Melange of references to PDC/DMA removed in favor of DMA implementation.

7284

UART:

Section 41-1 “UART Functional Block Diagram”

, revised.

7285

Electrical Characteristics:

Table 48-7, “Main Oscillator Characteristics”

, revised schematic in note below table.

Table 48-11, “32 kHz Oscillator Characteristics”

, revised schematic in note below table.

7304

Table 48-5, “Processor Clock Waveform Parameters”

, updated.

Table 48-6, “System Clock Waveform Parameters”

, replaces “Master Clock Waveform Parameters”.

Section 48.13 “SMC Timings”

, added to datasheet.

Section 48.14 “DDRSDRC Timings”

, added to datasheet.

Section 48.15 “Peripheral Timings”

, added to datasheet.

7334

Table 48-2, “DC Characteristics”

Table 48-3, “Power Consumption for Different Modes”

Table 48-4, “Power Consumption by Peripheral in Active Mode”

Table 48-17, “I/O Characteristics”

former TBDs assigned values

rfo

Doc. Rev
11063B

Comments

Change
Request
Ref.

Table 4-2, “BGA247 Pin Description”

updated.

7271

Doc. Rev
11063A

Comments

Change
Request
Ref.

First issue

Doc. Rev
11063C

Comments (Continued)

Change
Request
Ref.