Atmel Evaluation Kit AT91SAM9M10-G45-EK AT91SAM9M10-G45-EK Data Sheet

 1050

SAM9M10 [DATASHEET]

6355F–ATARM–12-Mar-13

This block has the same functionality as Channel-U, but for the Lower Panel in dual scan mode only.

This block receives the request signals from the LCDC core and generates the requests for the channels.

The configuration block is a set of programmable registers that are used to configure the LCDC core operation.
These registers are written via the AHB slave interface. Only word access is allowed.

The description of the configuration registers can be found in 

.

The datapath block contains five submodules: FIFO, Serializer, Palette, Dithering and Shifter. The structure of the
datapath is shown in 

.

Datapath Structure

This module transforms the data read from the memory into a format according to the LCD module used. It has four
different interfaces: the input interface, the output interface, the configuration interface and the control interface. 

FIFO

Serializer

Palette

Dithering

Output

Shifter

Input Interface

Output Interface

Configuration IF

Control Interface