Atmel SAM4L-EK Atmel ATSAM4L-EK ATSAM4L-EK Data Sheet
Product codes
ATSAM4L-EK
811
42023E–SAM–07/2013
ATSAM4L8/L4/L2
30.6.3.2
WAVSEL = 0
When CMRn.WAVSEL is zero, the value of CVn is incremented from 0 to 0xFFFF. Once
0xFFFF has been reached, the value of CVn is reset. Incrementation of CVn starts again and
the cycle continues. See
0xFFFF has been reached, the value of CVn is reset. Incrementation of CVn starts again and
the cycle continues. See
.
An external event trigger or a software trigger can reset the value of CVn. It is important to note
that the trigger may occur at any time. See
that the trigger may occur at any time. See
RC Compare cannot be programmed to generate a trigger in this configuration. At the same
time, RC Compare can stop the counter clock (CMRn.CPCSTOP = 1) and/or disable the counter
clock (CMRn.CPCDIS = 1).
time, RC Compare can stop the counter clock (CMRn.CPCSTOP = 1) and/or disable the counter
clock (CMRn.CPCDIS = 1).
Figure 30-5. WAVSEL= 0 Without Trigger
Time
Counter Value
RC
RB
RA
TIOB
TIOA
Counter cleared by compare match with
0xFFFF
0xFFFF
Waveform Examples