Atmel ATmega328P Xplained Mini MEGA328P-XMINI MEGA328P-XMINI Data Sheet
Product codes
MEGA328P-XMINI
201
ATmega48A/PA/88A/PA/168A/PA/328/P [DATASHEET]
Atmel-8271H-AVR- ATmega-Datasheet_08/2014
21.6
Data Transfer
Using the USART in MSPI mode requires the Transmitter to be enabled, i.e. the TXENn bit in the UCSRnB
register is set to one. When the Transmitter is enabled, the normal port operation of the TxDn pin is overridden
and given the function as the Transmitter's serial output. Enabling the receiver is optional and is done by setting
the RXENn bit in the UCSRnB register to one. When the receiver is enabled, the normal pin operation of the
RxDn pin is overridden and given the function as the Receiver's serial input. The XCKn will in both cases be
used as the transfer clock.
register is set to one. When the Transmitter is enabled, the normal port operation of the TxDn pin is overridden
and given the function as the Transmitter's serial output. Enabling the receiver is optional and is done by setting
the RXENn bit in the UCSRnB register to one. When the receiver is enabled, the normal pin operation of the
RxDn pin is overridden and given the function as the Receiver's serial input. The XCKn will in both cases be
used as the transfer clock.
After initialization the USART is ready for doing data transfers. A data transfer is initiated by writing to the UDRn
I/O location. This is the case for both sending and receiving data since the transmitter controls the transfer
clock. The data written to UDRn is moved from the transmit buffer to the shift register when the shift register is
ready to send a new frame.
I/O location. This is the case for both sending and receiving data since the transmitter controls the transfer
clock. The data written to UDRn is moved from the transmit buffer to the shift register when the shift register is
ready to send a new frame.
Note:
To keep the input buffer in sync with the number of data bytes transmitted, the UDRn register must be read once for
each byte transmitted. The input buffer operation is identical to normal USART mode, i.e. if an overflow occurs the
character last received will be lost, not the first data in the buffer. This means that if four bytes are transferred, byte
1 first, then byte 2, 3, and 4, and the UDRn is not read before all transfers are completed, then byte 3 to be received
will be lost, and not byte 1.
each byte transmitted. The input buffer operation is identical to normal USART mode, i.e. if an overflow occurs the
character last received will be lost, not the first data in the buffer. This means that if four bytes are transferred, byte
1 first, then byte 2, 3, and 4, and the UDRn is not read before all transfers are completed, then byte 3 to be received
will be lost, and not byte 1.
The following code examples show a simple USART in MSPIM mode transfer function based on polling of the
Data Register Empty (UDREn) Flag and the Receive Complete (RXCn) Flag. The USART has to be initialized
before the function can be used. For the assembly code, the data to be sent is assumed to be stored in Register
R16 and the data received will be available in the same register (R16) after the function returns.
Data Register Empty (UDREn) Flag and the Receive Complete (RXCn) Flag. The USART has to be initialized
before the function can be used. For the assembly code, the data to be sent is assumed to be stored in Register
R16 and the data received will be available in the same register (R16) after the function returns.
The function simply waits for the transmit buffer to be empty by checking the UDREn Flag, before loading it with
new data to be transmitted. The function then waits for data to be present in the receive buffer by checking the
RXCn Flag, before reading the buffer and returning the value.
new data to be transmitted. The function then waits for data to be present in the receive buffer by checking the
RXCn Flag, before reading the buffer and returning the value.