Sony HT-GT1 HTGT1 User Manual
Product codes
HTGT1
HT-GT1.GB.4-542-874-
12(1)
18
GB
Preparing for TV sound
You can listen to the TV sound through this system by connecting the
subwoofer and the TV as shown below, using the optical digital cable
(supplied).
subwoofer and the TV as shown below, using the optical digital cable
(supplied).
Rear of the subwoofer
TV
Optical digital cable
(supplied)
Digital Out
(Optical) jack
To listen to the TV sound with an optical digital connection
Turn on the TV, and then press FUNCTION +/– repeatedly to select the optical
function.
function.
Note
The system may enter standby mode automatically if the volume level of the connected
TV is too low. Adjust the volume level of the TV. If you turn off automatic standby
function, see “Setting the automatic standby function” (page 39).
TV is too low. Adjust the volume level of the TV. If you turn off automatic standby
function, see “Setting the automatic standby function” (page 39).
Hints
ˎ
You can also connect external equipment (DVD players, etc.) to the OPT IN jack. When
connecting such equipment, connect the OPT IN jack and the Digital Out (Optical)
jack of the equipment in the same manner as shown above. For details, refer to the
operating instructions of your equipment.
connecting such equipment, connect the OPT IN jack and the Digital Out (Optical)
jack of the equipment in the same manner as shown above. For details, refer to the
operating instructions of your equipment.
ˎ
If the audio output level from the system is low when connecting the external
equipment, try adjusting the audio output settings on the connected equipment. It
may improve the audio output level. For details, refer to the operating instructions of
your equipment.
equipment, try adjusting the audio output settings on the connected equipment. It
may improve the audio output level. For details, refer to the operating instructions of
your equipment.
If “CODE 01” appears on the display of the subwoofer
When the audio input signals to the system are other than 2-channel
Linear PCM signals, the message “CODE 01” (indicates that the input audio
signals are unsupported) appears on the display of the subwoofer.
In this case, select the proper audio output mode on the TV or external
equipment in order to output 2-channel Linear PCM audio signals.
Linear PCM signals, the message “CODE 01” (indicates that the input audio
signals are unsupported) appears on the display of the subwoofer.
In this case, select the proper audio output mode on the TV or external
equipment in order to output 2-channel Linear PCM audio signals.