Conrad 12 Vdc delayed action timer relay module 193631 Data Sheet
Product codes
193631
course of easily adjustable interval time without modifying the control voltage. If the
supply of control voltage is interrupted before the course of adjusted switching time,
then the relay switches back to its idle position.
Switching ON delay
If the link plug is plugged in the 3-pin multi-pin connector at "EV" = switching on
delay, then the relay is activated with the supply of control voltage and after the course
of adjustable delay time and thereafter remains activated till the control voltage is
interrupted.
C= as per connection
S= Closing contact
Ö= Break contact
supply of control voltage is interrupted before the course of adjusted switching time,
then the relay switches back to its idle position.
Switching ON delay
If the link plug is plugged in the 3-pin multi-pin connector at "EV" = switching on
delay, then the relay is activated with the supply of control voltage and after the course
of adjustable delay time and thereafter remains activated till the control voltage is
interrupted.
C= as per connection
S= Closing contact
Ö= Break contact
OPERATING CONDITIONS
The permissible environment temperature (room temperature) must not exceed or fall
below from -5
°
C to + 60
°
C while operating. With formation of condensation water, the
acclimatization period may be extended (up to 2 hours). The module is designed for
use in dry and clean rooms. You can use the module in any position. If the module is
installed in housing, then you must ensure that it has air circulation on all sides. The
ventilation slot should not be covered.
MALFUNCTION
It is presumed that, safe operation is no longer possible and therefore the module is
shut down and is secured against unintentional use. This also applied to:
- If the module is visibly damaged
- If the module is no longer functional
- If the mains or other connection cables show visible damages.
GENERAL INSTRUCTIONS
The module has been tested at the factory and was dispatched in perfect condition. The
operator must follow the instructions and warning notes mentioned in this user manual
in order to ensure safe use. A 12 months performance warranty is provided for this
module. For this purpose, it is required that no changes must have been made at
the module. It is recommended that the module must be carefully packed for return
consignment.
use in dry and clean rooms. You can use the module in any position. If the module is
installed in housing, then you must ensure that it has air circulation on all sides. The
ventilation slot should not be covered.
MALFUNCTION
It is presumed that, safe operation is no longer possible and therefore the module is
shut down and is secured against unintentional use. This also applied to:
- If the module is visibly damaged
- If the module is no longer functional
- If the mains or other connection cables show visible damages.
GENERAL INSTRUCTIONS
The module has been tested at the factory and was dispatched in perfect condition. The
operator must follow the instructions and warning notes mentioned in this user manual
in order to ensure safe use. A 12 months performance warranty is provided for this
module. For this purpose, it is required that no changes must have been made at
the module. It is recommended that the module must be carefully packed for return
consignment.