Conrad 16-Channel Running Light Controller Module 190486 Data Sheet
Product codes
190486
37
10. PC Connection
The 16-channel running light control can be programmed individually if required.
Reprogramming of the running light functions, however, requires extensive basic
knowledge of the programming language Compact C (simplified C-dialect).
Reprogramming of the running light functions, however, requires extensive basic
knowledge of the programming language Compact C (simplified C-dialect).
To connect the 16-channel running light control to a PC or notebook, solder on the interface
adapter (Conrad item number 197326) to the prepared connection “USB TO UART”. You will
also require a mini USB cable for connection to the PC.
When you have soldered on the interface plug and connected the connection cable, install the
driver included with the interface plug on your PC.
adapter (Conrad item number 197326) to the prepared connection “USB TO UART”. You will
also require a mini USB cable for connection to the PC.
When you have soldered on the interface plug and connected the connection cable, install the
driver included with the interface plug on your PC.
Figure 9
Under www.c-control.de, you will find an IDE developer environment in the area “C-Control
Pro” (C-ControlSetup.exe) and the running light programme for free-of-charge download.
Pro” (C-ControlSetup.exe) and the running light programme for free-of-charge download.
16 - K_Lauflicht_V11
Q1
GND
UB
GND
RC
GND
TXD
RXD
USB TO UART
R23
C11
C10
R22
U1
U2
LED1
R21
C7
D3
R24
L1
R1
R1
SW 1 SW 2
RESET MODE
5 - 18 VDC