Megasat HD Stick 510se 0201022 User Manual

After connecting the receiver to other required equipment, turn on the receiver, there 
should be no channel information available at first. You need to follow the procedure to 
setup your receiver to search the channel.

Press MENU button to activate main menu, main menu consists of Installation, Service 
organization, Output, System, Timer, USB.

Use UP/DOWN button to select your subject and press OK to confirm your selection and 
enter that sub menu, press EXIT button you can return to the previous menu.

Select Installation, the picture will be 
displayed like this, here you can do Dish 
setup, Restore Factory Default, Software 
Update, Save or Load STB data

Antenna Settings
Press OK to Enter Dish setup, here you 
can make Satellite Scan, Satellite Edit, TP 
Search, TP Edit and other related Func-
tions.

A: Satellite List
This window shows the pre-stored satel-
lite list, in this menu, you can Add, Edit, 
Delete, Satellites.

08

09

You can connect one fixed dish LNB directly to the LNB IN, or connect at least two dish 
LNB by DiSEqC Switch, you can also connect to HH mount dish LNB.

HDMI

Coax cable

Dish

TV

The following diagram shows you how to connect the HD receiver, TV, LNB and other 
equipment, please read this first if you are not sure about the connection, and it will 
guide you to the correct connection.

LNB