Megasat HD Stick 510se 0201022 User Manual

10

11

Add
Add satellite by using the Red key. Here 
you can input new Satellite angle, Sa-
tellite Direction (east, west), Band (ku,c). 
OK to confirm the setting and this new 
satellite will be added to the end of the 
Satellite list.

Transponder List
If you change the satellite, the transpon-
der will be changed automatically. You 
will find the transponder list of selected 
satellite here. Press the sat button can 
switch the TP and SAT list. In this menu 
you can Add, Edit, Delete, Transponder. 
The Operation similar to the above, you 
can input the transponder frequency, 
symbol rate, and choose polarization 
(Ver, Hor) 

B: LNB Type and LNB Power
Here you need to check the LNB frequen-
cy according to your antenna, set the 
correct frequency or define yourself, and 
keep LNB power to be 13/18V.

C: 22KHz
In case you are using two antennas con-
nected to a 22KHz tone switch box. You 
can supply either 22KHz by setting “OFF” 
to select antenna.

D: DiSEqC1.0 DiSEqC1.1
If you connect antenna to DiSEqC Switch, 
you need to specify the DiSEqC input to 
which your selected satellite have been 
configured.

E: Motor 
When you enable this option, and press 
OK, you will get this window to show you 
how to adjust position of the dish.

Edit
Select the satellite then press green but-
ton. You can change the satellite’s name, 
angle, direction and band. Input the cha-
racters which you want to edit using the 
browser.

Delete
You can delete the user’s satellite. Select 
the satellite that you want to delete from 
the satellite list. You will be asked to con-
firm whether delete the satellite or not. If 
you press ok key, all the channels in the 
selected satellite and transponder will 
be deleted, and the selected satellite will 
disappear.