Kaiser Nienhaus Radio-controlled code keypad 350600 N/A 350600 User Manual

now, conduct the function test. If it fails, repeat the action.

If the “bell/light” key is released before the above-mentioned 4 seconds have 

elapsed, the learning process is terminated; this is indicated by three short light sig-

nals. The existing radio code is then retained. 

Resetting the device causes the following to occur:

All access codes are reset.

• 

all radio code locations are uniquely assigned again.

• 
In order to perform a reset:

Remove the battery.

Wait approx. 10 seconds.

push the 

0 key and simultaneously replace the battery, holding the 0 button for 

at least 5 seconds. 

The following light signals are emitted:

slow flashing for approx. 1 second

 

–

rapid flashing for approx. 4 seconds

 

–

extremely rapid-flashing for approx. 2 seconds

 

–

Release the 

0 key.

The device is now in the normal operating mode again.

If the “0” key is released before the above-mentioned 5 seconds have elapsed, the 

reset procedure is terminated and three short light signals are emitted. The device 

is now in the normal operating mode again. The existing access codes and radio 

codes are then retained.

TR20A004-C / 08.2009

17