Kaiser Nienhaus Radio-controlled code keypad 350600 N/A 350600 User Manual

During normal operation the “bell/light” key has a special status – you can use it to 

transmit directly, i .e . without having to enter an access code, in the same way 

as transmitting and learning using a hand transmitter. Furthermore, your radio code 

can be recoded by resetting.

Within the operating functions this direct function is nearly always active, i.e. also 

when an access code is being entered, provided that no other key is being 

pressed, no transmission is being made to another radio code location and no 

transmitting or learning is in progress.

An exception is the 20-second phase, in which the same radio code can be 

repeatedly transmitted without a new access code having to be entered, because 

for the premature termination of this phase the “bell/light” key is needed. During this 

20-second phase, the direct function of the “bell/light” key is therefore deactivated.

press the 

 

f

bell/light key.

a long light signal is emitted and the corresponding radio code is transmitted 

(light signal flashes rapidly). 

as long as the “bell/light” button is pressed, the radio code is transmitted, but for a 

maximum of 15 seconds.

During the learning process, activation of the teaching transmitter can initiate a 

door travel if a receiver programmed for it is located nearby!

Please ensure that no persons or objects are within the danger area of the 

 

f

door during the learning process.

Hold the teaching transmitter close to the code modulator, as shown, and then 

press and hold the desired key, of which the radio code is to be learned. (see 

Figure 2)

press and hold the 

bell/light key.

A long light signal is emitted.

If the signal received from the teaching transmitter is strong enough, after 

approx. 0.5 seconds a rapid-flashing light signal is emitted for approx. 4 

seconds to indicate that the signal can be learned.

Press the key until the end of these 4 seconds.

after successfully completing the learning process, a long light signal is emitted.

Release the keys of both the teaching transmitter and the FCT3b.

16

TR20A004-C / 08.2009