Hobart Corp. Water System WS-40 User Manual
INSTALLATION
INSTALLATION WS-40/80
SAVE THESE INSTRUCTIONS
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
follow lockout / tagout procedures.
1.
Locate water supply line and appropriate drains
for softener installation.
for softener installation.
2.
Install by-pass valving.
Fig. 1
3.
Install high temperature prefilter if needed.
Fig. 2
4.
Remove all items from shipping package.
5.
Install wheel kit on WS-80.
NOTE: Wheel kit for WS-40, already installed.
6.
Locate brass in/out adapters, 4 O-rings, and
silicone seal lube.
silicone seal lube.
Fig. 3
7.
Locate connector hoses and apply 2 to 3 wraps
of Teflon tape to the male threads.
of Teflon tape to the male threads.
Fig. 4
8.
Thread the brass in/out adapters tightly onto the
threaded ends of the connector hoses.
threaded ends of the connector hoses.
WS-40/80 Hobart Compact Water Softener Installation Instructions - INSTALLATION
Page 3 of 10
F25404 Rev. A (0413)