Bunn Chilled LCC-2 User Manual

21

 

Right (Decaf) Water Rate

Enter Liters collected from the 20 sec. 

test above.

Default = 1.08

Range = 0.95 - 1.12 Liters

Cooler Control Temperature

Delays the Pump turn off after a 

dispense.

Default = 200

Range = 1 - 999 mSec.

Reset Factory Defaults

Resets all set up values to the Factory 

Default setting.

Hold both Increase (+)  and  Decrease 

(-) switch for 10 seconds.

Displays Software Version # -

Exits To Home View After 3 Seconds.

English or Metric Mode

Used to select the desired units.

Default = English

Eng for English

S.I. for Metric

Error Code Memory

Display cycles through the last (3) 

Error Codes.

Erase by holding both the Decrease (-) 

& Increase (+) switches for 10 sec.

39288 072707

Pump “OFF” Delay

Used to set the Target Temperature for 

the Product Cabinet.

Default = 65°F (18°C)

Range = 50° - 75°F (10° - 24°C)

MENU

(-)

(+)

MENU

(-)

(+)

MENU

(-)

(+)

MENU

(-)

(+)

MENU

(-)

(+)

MENU

(-)

(+)

MENU

(-)

(+)

Maximum Cooling Mode

Set Product Cabinet Target Temperature 

to 50°F (10°C). Then continue to hold 

the decrease (-) switch for 10 sec. Unit 

will display “CHL”. Chiller will now 

attempt to cool the product cabinet to 

45°F (7°C). To disable this mode, hold 

the increase (+) switch for 10 sec. Then 

adjust to the desired Cabinet Temp.

NOTE: All Cabinet Temperature 

Warnings are disabled when in the 

Max. Cooling Mode.

MENU

(-)

(+)