Honeywell Optiflex User Manual
1-1
S E C T I O N 1
General Information
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
Introduction to Optiflex
♦
Optiflex Features
♦
Optiflex Typical System Block Diagram
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Introduction to Optiflex
Optiflex is an interactive Video System that provides multiplexed local and remote video
monitoring for up to six cameras. It can temporarily save up to 10 frames from each of the
six cameras (video frames are stored internally in JPEG format) at a rate of one frame per
second. Cameras can be triggered either by an external voltage source, or by system events
from a Honeywell Vista security system (e.g., burglary alarm at front door). Optiflex can
also interface with a Symphony Advanced User Interface via Ethernet to display video on
demand. Images may also be viewed on a stand-alone video monitor if desired.
monitoring for up to six cameras. It can temporarily save up to 10 frames from each of the
six cameras (video frames are stored internally in JPEG format) at a rate of one frame per
second. Cameras can be triggered either by an external voltage source, or by system events
from a Honeywell Vista security system (e.g., burglary alarm at front door). Optiflex can
also interface with a Symphony Advanced User Interface via Ethernet to display video on
demand. Images may also be viewed on a stand-alone video monitor if desired.
Optiflex Features
General Features
• Support for up to six camera inputs
• One Monitor Output
• Integral 4204 Relay Module capability
• Selectable Dwell Time for Guard Tour Viewing (sequential scanning of multiple cameras)
• Time and Date Stamping
• Camera Identification
• Local and/or remote viewing capabilities
• Video captures (up to 19 captures of 10 frames each) viewable through Optiflex Connect
• One Monitor Output
• Integral 4204 Relay Module capability
• Selectable Dwell Time for Guard Tour Viewing (sequential scanning of multiple cameras)
• Time and Date Stamping
• Camera Identification
• Local and/or remote viewing capabilities
• Video captures (up to 19 captures of 10 frames each) viewable through Optiflex Connect
(remote viewing) or Optiflex Direct (local viewing on PC)
Secure Remote Viewing
• Firewall friendly installation
• Video Transmission via Ethernet
• Remote viewing of multiple locations using Optiflex Connect
• Password Protection
• Selectable Single or Multiple Display
• Video Transmission via Ethernet
• Remote viewing of multiple locations using Optiflex Connect
• Password Protection
• Selectable Single or Multiple Display
Optiflex Connect is required for remote viewing of video images over the Internet. Optiflex Direct is
required for local viewing on a PC. Neither is required for local viewing at a monitor connected
directly to the Optiflex unit. For information on how to obtain these services and set your system up
for remote viewing and local viewing on a PC, log on to
http://www.security.honeywell.com/hsce/alarmnet/optiflex.
required for local viewing on a PC. Neither is required for local viewing at a monitor connected
directly to the Optiflex unit. For information on how to obtain these services and set your system up
for remote viewing and local viewing on a PC, log on to
http://www.security.honeywell.com/hsce/alarmnet/optiflex.