Bunn Single SH DBC* (with Smart Funnel) Owner's Manual

Page of 50
Page 23
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
Setting Pulse Brew - BY EXAMPLE:
1.   This display should read CONTAINER READY? 
Place a container under the sprayhead. Place a 
brew funnel containing a filter and grounds on top 
of the container so that the spray and coffee bed 
can be viewed. (See Fig. 1)
2.  Choose the batch size to be set by pressing the pad 
next to the indicator light on the left brew side. The 
batch size indicator selected will be flashing.
3.  If everything is in place, press YES in the CON-
TAINER READY? screen. The display should read 
PRESS BREW TO START 1ST ON TIME.(a) 
4.  Press and release the 
 pad. The brew water 
will start to flow into the funnel and the water level 
will rise.(b)
5.  Watch the flow of water. When it reaches the 
desired level in the funnel, press and release the 
 pad again to end the 1ST ON TIME.(c)
6.  The spray will stop and the brew funnel will start 
to empty. When the water level in the funnel drains 
to the desired level, press 
 again to end the 
OFF-TIME. This also begins the spray of water for 
the final setting.(d)
7.  The brew water will begin again and the water level 
in the funnel will rise. Watch the flow of water. 
When it reaches the desired level, press 
 to 
end the LAST ON TIME.(e)
8.  The display should now show the 1st, off and last 
times for the batch size just programmed. After a 
5 second delay, the display will read 3 BATCHES 
DONE? (f and g)
9.  If other batches need to be modified, press NO. 
The display will go back to SET BY EXAMPLE. 
Press YES, then press a different batch size pad 
and repeat steps 1 through 8.  Repeat until all the 
desired batch sizes are set for the left side. (g)
10. When finished press YES in 3 BATCHES DONE?. 
The display will then read SET PREINFUSION. 
Another alternative is to press the 
 pad located 
on the front panel of the brewer to exit SET PULSE 
BREW and return to the MAIN SCREEN.
NOTE: Pressing ® before reaching the final setting 
screen exits the setup and retains the old values.
P2452
FIG. 1
SET BY EXAMPLE
RETURN TO
SET BY EXAMPLE
SEE MODIFYING
PREINFUSION
5 SEC. DELAY
CONTAINER RDY?
QUIT                YES
PRESS BREW TO
SET 1ST ON TIME
PRESS BREW TO
END 1ST ON TIME
PRESS BREW TO
END OFF TIME
PRESS BREW TO
END LAST ON TIME
1ST       OFF     LAST
X:XX     X:XX     X:XX
SET PREINFUSION?
NO                   YES
3 BATCHES DONE?
NO                   YES
P2410
34025  022509