Bunn Single SH DBC* (with Smart Funnel) Owner's Manual

Page 25

This function allows the operator to set an initial 

soaking of the grounds and a delay time, before the 

complete brew cycle starts.

Range:  On time - off to 4 minutes

Off time - off to 4 minutes for all three batch 

sizes

NOTE: If the brewer is already in the SET PREINFUSION 

screen, it is not necessary to follow steps 1 through 9 

in this section, but proceed directly to step 10.

1.  Press and hold the ® pad until the display reads 

SET NEW RECIPES. Release the ® pad. Press the 

® until the display reads REVIEW RECIPES.

2. Press YES to proceed. The display should now 

read NO NAME, along with MODIFY, SHOW and 

3.  Press and release NEXT to advance to the desired 

coffee name to be modified.

4.  Press and release MODIFY. The display should 

read BREW OZ. 

5.  Press and release DONE. The display should read 

3 BATCHES DONE?.

6.  Press and release YES. The display should now 

read % BYPASS. 

7.  Press and release DONE. The display should read 

3 BATCHES DONE?.

8.  Press and release YES. The display should now 

read SET PULSE BREW. 

9.  Press and release NO. The display should now 

read SET PREINFUSION. 

10. Press YES to proceed. The display should now 

read ON TIME and a batch light will be blinking.

11. Using (-) and (+), set the amount of time the brew 

water will initially presoak the grounds for that 

particular batch size. 

12.  When finished, press another batch size and repeat 

until all three batch sizes are set.

13. When finished, press DONE. The display should 

now read OFF TIME and a batch light will be blink-

ing.

14. Using (-) and (+), set the amount of time the brew 

cycle will delay (after the presoak cycle shuts off) 

before resuming brewing.

15.  When finished, press another batch size and repeat 

until all three batch sizes are set.

16. When finished, press DONE. The display will show 

the ON and OFF TIMES that were entered for a 

particular batch size.

17. After a 5 second delay, the display should read 

3  BATCHES DONE?. If the three batches are not 

complete, press NO in order to return to SET 

PREINFUSION,  and repeat steps 10 through 14.

18. If the three batches are done, press YES. This will 

advance to the next function, SET DRIP TIME. An-

other alternative is to press the 

 pad located 

on the front panel of the brewer to exit SET PULSE 

BREW and return to the MAIN SCREEN.

REVIEW RECIPES?

NO                     YES

SET PREINFUSION?

NO                     YES

3 BATCHES DONE?

NO                     YES

ON                     OFF

X:XX                  X:XX

OFF TIME  X:XX

(-)        DONE        (+)

DRIP TIME  X:XX

(-)        DONE        (+)

ON TIME  X:XX

(-)        DONE        (+)

(COFFEE NAME)

MODIFYSHOWNEXT

THAT WAS THE

LAST RECIPE

NO-NAME

MODIFYSHOWNEXT

EXIT TO

NEXT FUNCTION

SCREEN

ADVANCES

TO NEXT

SCREEN

5 SEC. DELAY

PRESS

DONE

YES

DONE

YES

NO

SCREEN DISPLAYED

BREW OZ: XX.XX

3 BATCHES DONE?

% BYPASS XX.X

3 BATCHES DONE?

SET PULSE BREW?

ADVANCES TO ALL OTHER

COFFEE NAMES PROGRAMMED

IN THE BREWER'S MEMORY

WHEN THE LAST COFFEE NAME

IN THE BREWER'S MEMORY IS

DISPLAYED, PRESSING NEXT

WILL EXIT AND THE DISPLAY

WILL THEN READ:

SEE MODIFYING

DRIP TIMES

P2446

34025  022509