Behringer Europack Pro RX1602 User Manual

EURORACK PRO RX1602 User Manual

(15)

(14)

(13)

Fig. 2.4: MAIN OUT and MON OUT SEND connectors

(13) 

The MAIN OUT connectors come as 1/4" TRS jacks. The main mix signal 

(derived from all channels) is present here. You can set the output signal 

level by using the MAIN LEFT and MAIN RIGHT controls  

(8)

  (reducing all the 

way down to -∞ , increasing up to +15 dB). The main mix signal can be used 

to feed your mixing console or  stereo amplifier, among others.

(14) 

The monitor signal can be taken at the MON OUT SEND connector 

(1/4" TRS connector). It is just as well-suited for being used with 

effects applications.

(15)

(14)

(13)

Fig. 2.5: Mains connector with integrated fuse compartment

(15) 

The mains connection is achieved via the standard IEC connector. A matching 

power cord is included.
FUSE COMPARTMENT/VOLTAGE SELECTION: Before plugging the unit into 

a power socket, please make sure you have selected the correct voltage. 

Faulty fuses must be replaced with fuses of appropriate rating without 

exception. Some units feature a fuse compartment that can be operated 

in two different positions, allowing alternating between 230 V and 120 V. 

Attention: when using the unit outside of Europe (running on 120 V), 

you have to implement a fuse with a higher rating.
SERIAL NUMBER. The serial number is located on the top of the 

unit. Please take a few minutes and send to us a completely filled 

out warranty card within 14 days of the original date of purchase. 

Otherwise, warranty claims may be rendered invalid. Or fill out the 

warranty information online at behringer.com.

Very often, keyborards feature a stereo design, their signals are already 

pre-amplified and require no sound processing. To avoid using valuable channels 

of your main mixer for a purpose other than processing mic signals, you can 

instead use your RX1602 as a sub-mixer.
In this case, the output signals of keyboards, samplers or similar sound sources 

are connected to the inputs  

(6)

  of the RX1602. You can route the MAIN OUTs of 

your RX1602 into your main mixer via the aux returns or a stereo channel.

Keyboard

EURORACK PRO RX1602

Channel inputs

Stereo input channels/

stereo aux returns

L

R

Main outputs

XENYX X2222FX USB

Fig. 3.1: Keyboard sub-mix using the RX1602