Zhone 4821-A2 User Manual

4821-A2-ZN21-30

 BitStorm 4800 Express Model 4821-A2 Installation Guide

39

You can initialize your BitStorm 4800 Express via a PC or terminal connected 
to the unit’s CONSOLE port. Then, using a series of CLI commands, 
GrandVIEW EMS or another Element Management System, or the web 
interface, you can configure the unit according to your requirements.

To log in to the BitStorm 4800 Express:

1 Connect a PC or terminal to the CONSOLE port. (See 

2 At the login> prompt, type admin and press Enter.

3 At the password> prompt, press Enter. The default login password is 

blank.

4 At the PDYN> prompt, type privilege and press Enter.

5 At the password# prompt, press Enter. The default privileged password is 

blank.

You are now logged on and in privileged mode, which allows you to configure 
the unit.

The startup procedure for the BitStorm 4800 Express system differs 
depending on the type of management used:

z

Inband Management – Operates over the uplink. 

z

Out-of-Band Management – Operates over Port 1.