Ulead 20810 User Manual

 

Windows ME 
and Windows 
2000: when 
the USB cable 
is unplugged 
from the PC, 
an "Unsafe 
Removal 
Device 
Detected" error 
message 
appears. 

When removing 
USB devices, it is 
recommended that 
users follow the 
"Safe Removal of 
USB Device" 
procedure. 

Procedure: 

A.  Right-click the Unplug or Eject hardware icon at 

the bottom-right of your computer screen. 

B.  Left-click the Unplug or Eject hardware text box 

to open the 'Unplug or Eject Hardware' screen. 

C.  From the 'Unplug or Eject Hardware' screen, 

select the device to be disconnected and then 
click the Stop button to bring up the 'Stop a 
Hardware device' confirmation screen. 

D.  From the 'Stop a Hardware device' confirmation 

screen select the device to be stopped and click 
OK to bring up the 'Safe To Remove Hardware' 
confirmation. 

E.  Disconnect the Digital Camera from your PC. 

Images lose 
formatting data 
during image 
capture in  "PC 
Camera" 
mode. 

If your hard disk's 
DMA setting is 
turned off images 
may lose formatting 
data during image 
capture. (Windows 
98 and Windows 
ME only.) 

Please check to make sure your hard drive's DMA 
setting is enabled, as follows: 
 
1.  From the Windows Start menu, select Settings, 

then Control Panel. 

2.  In the Control Panel double-click System, then 

click the Device Manager tab. 

3.  Select your hard drive from the list, then click 

Properties. 

4.  Click the Settings tab. 
5.  Make sure the box marked DMA is checked. If 

not, check the box to ensure that your hard drive 
will protect image attributes during capture.