Siemens Welding System ST PCS 7 User Manual
Process I/O
Dezentrale Peripherie ET 200pro
Power module PM-E
11/65
Siemens ST PCS 7 · November 2007
11
■
Overview
The power module PM-E DC 24 V is used within an ET 200pro
station when generating 24 V DC load voltage groups for elec-
tronics modules.
You can position power modules in an ET 200pro station any-
You can position power modules in an ET 200pro station any-
where to the right of the interface module. The first power mod-
ule is already integrated in the interface module.
Each power module which you install in the ET 200pro station in-
Each power module which you install in the ET 200pro station in-
terrupts the load voltage busbar, and opens up a new potential
group (common potential) for the load voltage supply 2L+. All
subsequent load voltages of the electronics modules are fed
from this power module. Each power module has a replaceable
fuse for protecting the device. Only line protection according to
DIN VDE 0100 need be provided externally in addition.
The electronics/sensor supply 1L+ is not interrupted by the
The electronics/sensor supply 1L+ is not interrupted by the
power module, it is looped through.
The power module is fitted on the associated bus module when
The power module is fitted on the associated bus module when
delivered.
■
Technical specifications
For detailed technical specifications of the power module PM-E,
see:
• Catalog IK PI
• Mall/CA 01 under "Distributed I/Os / ET 200pro"
• Catalog IK PI
• Mall/CA 01 under "Distributed I/Os / ET 200pro"
B) Subject to export regulations: AL: N, ECCN: EAR99H
■
Accessories
Connection module
The connection module for the power module PM-E is used to
connect the load voltage 2L+. It is fitted on the power module.
The module must be ordered separately, and is available with
The module must be ordered separately, and is available with
the following types of connection:
• CM PM-E direct
• CM PM-E ECOFAST
• CM PM-E 7/8"
• CM PM-E direct
• CM PM-E ECOFAST
• CM PM-E 7/8"
■
Selection and Ordering Data
Order No.
Power module
Power module PM-E DC 24 V
For generating 24 V DC load volt-
age groups for electronics mod-
ules within an ET 200pro station.
6ES7148-4CA00-0AA0
B)
Accessories
Connection modules for power
module
module
• Connection module CM PM-E
ECOFAST
for supply of 24 V DC load volt-
age, 1 ECOFAST Cu connection
6ES7 194-4BA00-0AA0
B)
• Connection module CM PM-E
direct
for supply of 24 V DC load volt-
age, up to two M20 cable
glands
6ES7 194-4BC00-0AA0
B)
• Connection module CM PM-E
7/8"
for supply of 24 V DC load volt-
age, 1 x 7/8"
6ES7 194-4BD00-0AA0
B)
Spare fuse
12.5 A fast-blow, for interface and
power modules, 10 units per pack
6ES7 194-4HB00-0AA0
Further accessories
For plugs, cables and further
accessories, see Catalog IK PI or
Mall/CA 01 under "Distributed
I/O / ET 200pro"
© Siemens AG 2007