Siemens Network Hardware SM2 monitoring system User Manual

200

U3585-J-Z125-8-76

SM2 operation

/START-SM2
CALL-ADMINISTRATION-PART
SET-RESPONSETIME-PARAMETER
START-MEASUREMENT-PROGRAM TYPE=*RESPONSETIME
OPEN-LOG-FILE FILE=*STD
END
.
.
.
.
/START-SM2
CALL-ADMINISTRATION-PART
STOP-MEASUREMENT-PROGRAM TYPE=*RESPONSETIME
CLOSE-LOG-FILE
END

In this example, SM2 is started with data output to the SM2 output file. The file is given the
default name SM2.hostname.yyyy.mm.dd.sss.nn. The monitoring cycle is set to 20 seconds
and the sampling cycle to 200 ms. The RESPONSETIME monitoring program is started in
accordance with definition 1, and monitors up to 1024 connections. The default options are
used for the number of ranges and for the range limits for the response, think, transaction
and wait times. All monitored data is written to the SM2 output file. At the terminal, the A
(ACTIVITY), M (MEMORY), C (CHANNEL) and D (DEVICE) reports are output in automatic
output mode.
After some time, SM2 is interrupted with the BREAK function (terminal key) and terminated.
However, the SM2 output file remains open and the RESPONSETIME monitoring program
continues running.

/START-SM2
CALL-ADMINISTRATION-PART
SET-RESPONSETIME-PARAMETER
START-MEASUREMENT-PROGRAM TYPE=*RESPONSETIME
OPEN-LOG-FILE FILE=*STD
MODIFY-MEASUREMENT-PERIODS OFFLINE-PERIOD=20,SAMPLING-PERIOD=200
CALL-EVALUATION-PART
START
.      (Output of the Reports)
.
.
BREAK or

[K2]

/INFORM-PROGRAM
END