Siemens AC65 User Manual
Java User’s Guide
8.3 OTAP Parameters
63
s
wm_java_usersguide_v12
Page 56 of 123
2008-02-25
Confidential / Released
8.3
OTAP Parameters
There is a set of parameters that control the OTAP procedures. These parameters can either
be set by AT command (AT^SJOTAP, refer to
be set by AT command (AT^SJOTAP, refer to
during the production of the device, or by SM
) during operation of the device in the field. None of the parameters, which are
set by AT command, can be overwritten by SM.
•
JAD File URL: the location of the JAD file is used to install or update procedures. The JAD
file needs to be located on the net (e.g.
file needs to be located on the net (e.g.
http://someserver.net/somefile.jad
or
http://
192.168.1.2/somefile.jad
).
•
Application Directory: this is the directory where a new application (JAD and JAR file) is
installed. The delete operation deletes this directory completely. When entering the appli-
cation directory with AT^SJOTAP or a short message ensure that the path name is not ter-
minated with a slash. For example, type "a:" or "a:/otap" rather than "a:/" or "a:/otap/". See
examples provided in
installed. The delete operation deletes this directory completely. When entering the appli-
cation directory with AT^SJOTAP or a short message ensure that the path name is not ter-
minated with a slash. For example, type "a:" or "a:/otap" rather than "a:/" or "a:/otap/". See
examples provided in
.
•
http User: a username used for authentication with the http server.
•
http Password: a password used for authentication with the http server.
•
Bearer:
the
network
bearer
used
to
open
the
HTTP/TCP/IP
connection,
either
GPRS
or
CSD.
•
APN or Number: depending on the selected network bearer this is either an access point
name for GPRS or a telephone number for CSD.
name for GPRS or a telephone number for CSD.
•
Net User: a username used for authentication with the network.
•
Net Password: a password used for authentication with the network.
•
DNS: a Domain Name Server’s IP address used to query hostnames.
•
NotifyURL: the URL to which results are posted. This parameter is only used when the
MIDlet-Install-Notify attribute or MIDlet-Delete-Notify attribute is not present in descriptor.
MIDlet-Install-Notify attribute or MIDlet-Delete-Notify attribute is not present in descriptor.
There are parameters that can only be set by AT command:
•
•
SM Password: it is used to authenticate incoming OTAP SMs. Setting this password gives
an extra level of security.
Note: If a password set by AT command, all SMs must include this password
an extra level of security.
Note: If a password set by AT command, all SMs must include this password
•
Ignore SM PID (TC65 only): when setting this the PID in received SMs is ignored.
•
Hide HTTP authentication parameters (TC65 only): this allows to hide the http authentica-
tion parameters in the at^sjotap read command and the otap tracer.
tion parameters in the at^sjotap read command and the otap tracer.
Table 10: Parameters and keywords
Parameters
Max. Length AT
Keyword SM
Install/update
delete
JAD File URL
100
JADURL
mandatory
unused
Application Directory
50
APPDIR
mandatory
mandatory
HTTP User
32
HTTPUSER
optional
unused
HTTP Password
32
HTTPPWD
optional
unused
Bearer
--
BEARER
mandatory
optional/P
APN or Number
65
APNORNUM
mandatory for CSD
optional/P
Net User
32
NETUSER
optional
optional/P
Net Password
32
NETPWD
optional
optional/P
DNS
--
DNS
optional
optional/P
Notify URL
100
NOTIFYURL
optional
optional/P
SM Password
32
PWD
optional
optional