Siemens TC63 User Manual
TC63 AT Command Set
13.6 AT+CMGR
s
TC63_ATC_V00.490
Page 330 of 501
5/24/05
Confidential / Draft - Do not copy
Notes
• Response if
is used to read an empty record index: +CMGR: 0,,0
• Response if
is used to read a non-existent record index: +CMS ERROR: invalid memory index
• The parameters
will only be displayed if parameter
of the
command is
set to 1.
• This command can be used only after the SMS data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the SMS read
commands will result in ''+CME Error: 14'' (SIM busy)
, this URC acknowl-
edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME
has completed reading data from the SIM card.