Roper Digital Camera CoolSnap User Manual
18 CoolSNAP
cf
/CoolSNAP
ES
Detector
Rear Panel Description
The following connectors, display lights, and controls are located on the back of
the cameras (pictured below).
the cameras (pictured below).
DATA connector:
for data transfer and power
• LVDS cameras: 20-pin, high-density connector
• IEEE-1394 cameras: 6-pin IEEE-1394 connector
• IEEE-1394 cameras: 6-pin IEEE-1394 connector
EXPOSE OUT connector:
BNC connector; the signal at the BNC connector will
go to a TTL high level (+ 5 V) when the exposure begins; useful for
synchronizing an external shutter in the illumination pathway; will not power
the shutter
synchronizing an external shutter in the illumination pathway; will not power
the shutter
XFER display light:
amber LED illuminates during data transfer
ON display light (LVDS camera)/PWR display light (IEEE-1394 cameras):
green LED illuminates when camera is powered on
green LED illuminates when camera is powered on
POWER switch (LVDS cameras only):
standard rocker switch
EXT PWR connector (IEEE-1394 cameras only):
5.5 x 2.1-mm DC jack for
auxiliary CoolSNAP power supply
CoolSNAP LVDS Rear Panel
CoolSNAP IEEE-1394 Rear Panel