Roper Digital Camera CoolSnap User Manual

Chapter 5. Basic Specifications  19 

 

The auxiliary CoolSNAP power supply (shown below) provides power to your 
CoolSNAP camera, but is required only under certain conditions. 

If your CoolSNAP camera is connected to an IEEE-1394 port that does not 
supply power (such as a 4-pin connector on a laptop computer) you need to use 
the auxiliary power supply. 

The data ports on the CoolSNAP camera do not pass power.  If the CoolSNAP 
camera is connected in a daisy chain configuration, and it is not the first device 
in the daisy chain, you need to use the auxiliary power supply. 

If the CoolSNAP camera is connected to a PC that supplies power through the  
6-pin IEEE-1394 port, the auxiliary power supply is not needed; however, 
connecting the power supply will not damage the camera. 

 

tion 

The auxiliary power supply ships with four unique wall plugs.  You need to 
install one of the plugs on the power supply before using it.  Select the correct 
plug for your wall socket and press it into the power supply.  The supplied 
plugs include: 

•  NEMA 1-15 for North America/Japan 
•  BS1363/A for United Kingdom 
•  EN50075 for Europe 
•  AS/NZS 3112-1993 for Australia/New Zealand 

 

Input voltage: 90-264 VAC/47-63 Hz 

Output voltage: 12 VDC 

Output current (maximum): 1250 mA