Toshiba Magnia Z300 User Manual

209

See the Software Guide of the RAID controller.

A probable cause is that the hard disk drive is not recognized. 
Carry out the following procedure to check the cause of the 
trouble.

If this does not remedy the problem, see “Remedy When Win-
dows NT/2000 is Unusable” on page 213.

1 Are the SCSI controller and RAID controller properly con-

nected?

See the Software Guide of the RAID controller.

2 Is the Hard Disk Drive (HDD) properly connected?

3 Increase the bootup priority of the Hard Disk Drive (HDD) 

you want to install or the controller to which that Hard Disk 
Drive (HDD) is currently connected.

4 When installing the OS, change the order in which the SCSI 

controller. RAID controller and SCSI host adapter device 
driver are installed.

5 Disconnect backup devices (e.g. MO Disk Drive) if any con-

nected to the SCSI controller before installing the OS.

A probable cause is various factors ranging from the hardware 
connection state up to the installed OS status. Carry out the follow-
ing procedure to check the cause of the trouble.

If this does not remedy the problem, see “Remedy When Win-
dows NT/2000 is Unusable” on page 213.