Toshiba Magnia Z300 User Manual

208

Probable causes are the motherboard, CPU, memory or keyboard 
malfunction, or that the BIOS setup is incompatible. Carry out the 
following procedure to check the cause of the trouble. If Windows 
NT/2000 can be used, see “Remedy When Windows NT/2000 is 
Usable” on page 212.

If Windows NT/2000 cannot be used, see “Remedy When Win-
dows NT/2000 is Unusable” on page 213.

1 Are the CPU, memory, and keyboard properly connected?

2 Start up the BIOS Setup Utility to check the BIOS setup.

Probable causes are that the RAID controller and hard disk drive 
are not properly connected, or that the RAID configuration is dam-
aged or not built. Carry out the following procedure to check the 
cause of the trouble.

If this does not remedy the problem, see “Remedy When Win-
dows NT/2000 is Unusable” on page 213.

1 Is the RAID controller properly connected?

See the Software Guide of the RAID controller.

2 Is the Hard Disk Drive (HDD) properly connected?

3 Execute the RAID controller utility to rebuild RAID.

All data may be lost if RAID is rebuilt. Do not rebuild RAID if 
rebuilding is judged to be difficult.