Quatech Serial Device Server User Manual
Installing the device drivers
Quatech SDS User’s Manual
Figure 29 - TCP/IP Network Configuration Parameters screen
Figure 30 shows the TCP/IP
network configuration parameters
including the following:
¾
Address type
¾
IP Address
¾
Subnet mask
¾
Default gateway
Step
Procedure
Description
Step 38
If you are satisfied with the parameters,
press Next to continue.
press Next to continue.
If you are not satisfied, press Change
Properties to change the TCP/IP
properties.
The Rerun network connectivity test pop-
up box displays.
up box displays.
Continue with □ Step 39.
The Internet Protocol (TCP/IP)
Properties dialog box displays.
Properties dialog box displays.
Figure 30 - Rerun network connectivity test pop-up box
Figure 31 shows the Rerun
network connectivity test pop-
up box.
Step
Procedure
Description
Step 39
Press OK.
The Network Connectivity Test screen
displays.
Go to □ Step 14.
Page 34
940-0183-153
July 2005