Listen Technologies Repeater RP 6004 User Manual

 

Connect the RP 6004 to the various units using Cat 
5 FTP or STP cables. Please observe the following 
guide lines: 

• 

Maximum cable length in one chain is 200 
m without repeater. This includes 
interconnection cables between the units. 
The max. usable cable length depends on 
the units connected and length of feeding 
cables etc. 

• 

Maximum cable length in one chain when 
using repeaters is 650 m. 

• 

As the RP 6004 Repeater is repeating only 
one of the four outputs A  (A1 or A2) or B 

(B1 or B2) the max. number of languages 
configured on the four outputs (1, 2, 3 and 
4)  is totally max. 16.  

If more languages are required, Interpreter 
sets for those languages have to be divided 
between both chains (A or B) on the CU 
6010. Normally the languages are supposed 
to be divided equally on chains A (A1 or 
A2) and B (B1 or B2). 

• 

If the last unit in one chain is a CS 6032 
Channel Selector, this unit has to be 
terminated with an external termination, as 
the CS 6032 does not have an internal 
termination. 

The optional 19”-Brackets allow the unit to be 
mounted in a rack with either the front (connector 
side) or the blank backside to the front side of the 
rack. The height is 1HU and allows units to be 
stacked using only 44mm rack height.  

Can also be mounted at the back of the rack cabinet 
freeing the space at the front of the rack. The 
cabinet shall then be deep enough to allow this.