Honeywell Work Light DR4300 User Manual

 

Table 6-2  Procedure for Replacing the Ink Cartridge 

Remove the power from the recorder, then open the door. 

Pull up on the pen lifter to raise the pen(s) from the chart plate. 

ATTENTION  Be careful not to move the pen arm while removing and installing the ink cartridge. 

Unclip and remove the purple (pen 1) or red (pen 2) ink cartridge from the pen arm. 

Remove the protective cap from the pen tip on the new cartridge and open its clip. (If you plan 
to store or ship the recorder, save the protective cap.) 

Slide the new cartridge onto the pen arm so that its tip fits into the notch at the end of the pen 
arm and close the clip to secure the cartridge to the pen arm. 

Push down the pen lifter to return the pen tip to the chart. 

Close the door and apply power.