Hitachi GR2000 User Manual

GR2000 Installation Guide

3-16

GR2K-GA-1002

Rev. 6.03

3.4

Routing Processor (RP)

Three types of RP models, RP-A1 (standard), and RP-C/C6 and RP-D/D6 (options for
highspeed media), apply to the GR2000 device models as listed in Table 3-12. Each
RP model comprises one RP board. Description of each RP board follows.

3.4.1

RP-A1/RP-D/RP-D6

The RP-A1 physically appears as Figure 3-20. To explore the switch and LED display
functions, see the Operations Guide.

Figure 3-20 RP-A1/RP-D/RP-D6 Front Panel View

Switch and LED indication

Table 3-12 RP Models

RP Model Name

Board Size

Applicable Device Model

RP-A1

Full-size, 30mm-wide

GR2000-4S, GR2000-6H, GR2000-10H, GR2000-20H,
GR2000-4, GR2000-10, and GR2000-20

RP-C/C6

Full-size, 30mm-wide

GR2000-6H, GR2000-10*, GR2000-10H*, GR2000-20H*,
and GR2000-20*

RP-D/D6

Full-size, 30mm-wide

GR2000-4S** GR2000-6H, GR2000-10, GR2000-10H,
GR2000-20H, and GR2000-20

* Use of RP-C sometimes limits configuration of these models. For details, see Section 4.2,
“Configuration Limits.”
** The MPLS or MPLS-based IP-VPN feature is not available for use with the GR2000-4S.

Table 3-13 BCU switch and function of LED indications

Nam

Name of switch
and LED

Status

Content

STATUS

LED: Green/
Yellow/ Red

Shows the operating
condition of RP.

Green: Operable operation
Yellow: Blocking and cock insertion and removal
possible.
Green blinking: Under preparation (being started up.)
Red: Fault
Extinguished: Operation not possible (Including the
device power supply being turned off)

LED: Green

Don’t care

LED: Green

Don’t care

LED: Green

Don’t care