Hampton Bay H200 User Manual

Hampton H200 Cast Freestanding Woodstove

18

Firebrick is included to extend the life of your 
stove and to radiate heat more evenly.  Check 
to see that all fi rebricks are in their correct 
positions and have not become  misaligned 
during shipping.

1) Open door.

2)  Push spring lever down while holding onto 

the door.

3)  Pull door down and lift out to remove. Bottom 

of door lifts right out.

1)  Remove the cast lid from the top of the 

stove.  

2)  Remove fan, if installed.

3)   Carefully lay the unit on it's back on a soft 

surface to prevent scratching.

4)  Remove the 4 standard legs by undoing the 

bolts.

5)  Secure the 4 short legs using the bolts 

removed from step 4. 

6)  Carefully bring stove to standing position.

7)  Place cast lid back on top of stove.

8)  Re-install fan, if removed.

9)  Place decal 918-700 (included with cast 

legs) on the back of the stove near the serial 
number decal.