Fortec Satellite TV System Innovation User Manual

 

23 

 

 

 

y

  Select Antenna-DiSEqC 1.2 using e/f buttons in 

Antenna Setup mode.  

y

  Press OK to access the DiSEqC 1.2 set up menu. 

y

  To define the Set-up limits, press OK on the 

corresponding row. 

x

 

Move East/West: Press e/f buttons to move 
the motor.  

x

 

East Limit: Press OK button to fix East Limit. 

x

 

West Limit: Press OK button to fix West limit. 

x

 

Disable Limits: Press OK button to disable 
East/West Limits.  

x

 

Go to Reference: Press OK button to move the 
motor to center (0) position. 

y

 Press 

f button to move west or e button to move east 

on the corresponding row. Press OK button to stop. 

y

  Nudge East/West: Fine tune the position using e/f 

buttons by adjusting 1 step. 

y

  Go to Satellite: Press OK button to move to the stored 

satellite position. 

y

  To recalculate the satellite positions, move to the 

corresponding row and press OK button. 

y

 

Press the RED button on the remote control to save the current settings. 

 

9.2.3 USALS 

 

y

  Select USALS in Positioner Setup and press OK. 

y

  Select an active transponder using f button. 

y

  Set your Longitude using 0~9 buttons and specify 

East/West using e/f buttons. 

y

  Set your Latitude using 0-9 buttons and specify 

South/North using e/f buttons. 

y

  Move to ‘Go to Satellite’ and press OK button to move 

the motor to the satellite position. 

y

  To move the motor to the center (0) position, move the 

cursor to the ‘Go to Reference’ row and press OK. 

y

  Press the RED button to save the current setting.