Argox OS-214ZIP User Manual

Poor printout quality.

D. Miscellaneous

. The ribbon may not be qualified.

The host shows "Printer Time out"

. The media may not be qualified.

1. Check if the communication cable(parallel or serial) is connected

securely to your parallel or serial port on the PC and to the
connector on the printer at the other end.

. Adjust the Darkness(heat temperature).
. Slow down the print speed.
. Refer to the next chapter and clean the related spare parts.

2. Check if the printer pow er is turned on.

Recovery

If the power cord is connected, the power switch is at position "I" and

the power LED has still not illuminated, check the fuse inside the
power adapter case.

To continue your print jobs after the abnormal conditions have been
corrected, simply press the panel button or restart the printer. Make sure
that the LED is not blinking and remember to resend your files

The data has been sent, but there is no output from the printer. Check

the active printer driver, if Label Dr. for your Windows system and the
label printer has been selected.

Vertical streaks in the printout usually indicate a dirty or faulty print

head.(Refer to the following example)

Clean the print head first, if they still persist, replace the print head.