Areca ARC-1110 User Manual

116

You must have administrative level permissions to install SATA 

RAID software. This procedure assumes that the SATA RAID 

hardware and FreeBSD are installed and operational in your 

system.

The following details Solaris installation procedure of the SATA 

RAID controller software. 

1. Insert the RAID subsystem CD in the CD-ROM drive.

2.  Copy  <CD-ROM>\PACKAGES\Solaris\http  directory  to  local 

The next following step is the same with Linux. Please see section 

5.2 For Linux.

The McRAID manager interface can be accessed through the built-

in configuration and administration utility that resides in the con-

troller’s firmware. It provides complete control and management of 

the controller and disk arrays, eliminating the need for additional 

hardware or software. 

The ArcHttp proxy server is provided on the CD-ROM delivered 

with SATA card or download from the www.areca.com.tw. The 

firmware embedded McRAID storage manager can configure and 

monitor the SATA RAID controller via ArcHttp Proxy Server.

1. Login as root. Copy the ArcHttp file to a local directory.

 

(1). Insert the SATA RAID controller CD in the CD-ROM drive.

(2). Copy <CD-ROM>\PACKAGES\Mac\http directory to local.

 Or

(1). Download from the www.areca.com.tw or from the email 

attachment.

2. You must have administrative level permissions to install SATA 

RAID controller ArcHttp software. This procedure assumes that the 

SATA RAID hardware and Mac driver are installed and operational 

in your system.

The following details are the installation procedure of the SATA 

RAID controller for Mac ArcHttp software.