Areca ARC-1110 User Manual

117

(1).Run the archttp64 using Terminal.app by using the following 

command:

Usage: sudo ./archttp64 (TCP_PORT). 

Parameters: TCP_PORT value= 1~65535 (If TCP_PORT assigned, 

Archttp will start from this port. Otherwise, it will use the setting 

in the archttpsrv.conf or default 81). This is the port address 

assigning for the first adapter.

Such as: sudo ./archttp64 1553

(2). Archttp server console started, Controller card detected then 

ArcHttp proxy server screen appears.

Copyright (c) 2004 Areca, Inc. All Rights Reserved.

Areca HTTP proxy server V1.80.240 for Areca RAID controllers.

                                                                                

Controller(s) list

--------------------------------------------

Controller[1](PCI) : Listen to port[1553].

Cfg Assistant : Listen to port[1554].

Binding IP:[0.0.0.0]

Note: IP[0.0.0.0] stands for any ip bound to this host.

--------------------------------------------

##############################

Press CTRL-C to exit program!!

##############################

Controller [1] Http: New client [9] accepted

Controller [1] Http: New Recv 243 bytes

Controller [1] Http: Send [174] bytes back to the client

The ArcHttp proxy server will automatically assign one additional 

port for setup its configuration. If you want to change the "archttp-

srv.conf" setting up of ArcHttp configuration, For example: General 

configuration, Mail Configuration, and SNMP Configuration, please 

start Web Browser by entering http://[Computer IP Address]:[cfg 

port number]