Americana Appliances CDR-850 User Manual
60
<PRE1282>
En
En
CAUTION:
÷ Do not play from a DAT, CD, MD or DCC source in a
÷ Do not play from a DAT, CD, MD or DCC source in a
programmed playback mode, as this may lead to incorrect
writing of the track numbers. If programmed playback of
the source is required, record each track separately using
the 1-Track Synchro recording mode.
writing of the track numbers. If programmed playback of
the source is required, record each track separately using
the 1-Track Synchro recording mode.
RECORDING (2) – AUTOMATIC DIGITAL-SOURCE
SYNCHRO RECORDING (ALL-TRACK RECORDING)
SYNCHRO RECORDING (ALL-TRACK RECORDING)
Blinks
Clignote
Parpadea
Clignote
Parpadea
Blinks
Clignote
Parpadea
Clignote
Parpadea
This operation automatically performs finalization after all-track
recording. Finalization is the final process in recording a CD-R
disc that makes it playable on standard CD players. (CD-RW
discs, whether finalized or not, can only be played back on a
CD-RW disc player.) Refer to page 86 for details.
recording. Finalization is the final process in recording a CD-R
disc that makes it playable on standard CD players. (CD-RW
discs, whether finalized or not, can only be played back on a
CD-RW disc player.) Refer to page 86 for details.
1
Perform steps 1 to 4 of “ALL-TRACK
RECORDING” on page 58.
RECORDING” on page 58.
2
In step 4 on page 58, set the recorder to ALL-
TRACK RECORDING (the SYNC indicator blinks)
and press the FINALIZE button so that the
FINALIZE indicator starts blinking.
TRACK RECORDING (the SYNC indicator blinks)
and press the FINALIZE button so that the
FINALIZE indicator starts blinking.
÷ To cancel automatic finalization, press the FINALIZE button
once again so that the FINALIZE indicator goes out (mode
will revert to ALL-track synchro).
will revert to ALL-track synchro).
3
When playback of the source is started, ALL-track
synchro recording starts.
synchro recording starts.
4
If there is no sound for more than 1 minute
during ALL-TRACK SYNCHRO RECORDING, the
recorder assumes that the recording has
stopped and finalization begins automatically.
during ALL-TRACK SYNCHRO RECORDING, the
recorder assumes that the recording has
stopped and finalization begins automatically.
÷ The finalize-standby mode can be canceled by pressing the
7 button or FINALIZE button while the unit is in the finalize-
standby mode.
standby mode.
÷ Operation buttons do not respond once finalization has
begun.
÷ Never turn the power off during finalization!
÷ System operation stops automatically without performing
finalization when no more recording time remains or when
there are 99 or more tracks.
there are 99 or more tracks.
RECORDING (3) - AUTOMATIC
FINALIZATION RECORDING
FINALIZATION RECORDING
2
FINALIZE