Datalogic Scanning Controller SC6000 User Manual

MAINTENANCE 

 
 

 
Once the system configuration has been completed, launch the DARP™ backup by one of 
the following methods: 
 
Using Genius: 

Click on the DARP™ backup icon in the Device Network area. You will be prompted to select 
the desired backup option (complete, all scanners, controller, or each single scanner). 
 
 
Using the SC6000 keypad: 

1.  Press the <Ent> and <Menu> keys simultaneously to enter the Menu; 

2.  Use the <arrow> keys to move within the menu items; 

3. In the <System> menu choose <Backup> and select the desired backup option 

(complete, all scanners, controller, or each single scanner). 

 
 
The SC6000 Controller will store the complete system configuration on the Compact Flash 
card. 
 
If a slave scanner has to be replaced, the corresponding configuration (node address, code 
configuration, PackTrack™ configuration, etc.) is automatically downloaded by the SC6000 
into the new scanner at the next system startup. 
 

 

 
In case of SC6000 failure, the complete system configuration can be recovered from the 
damaged SC6000 Compact Flash: by simply installing the old Compact Flash in the new 
SC6000, the system configuration is automatically restored and the reading station is ready 
to start working again.