Siemens Euroset 5015 S30350-S208-D803 User Manual

euroset 5015 / EU ger-eng-cre-slov / A30350-M208-D801-3-Z419 / 5015.fm / 14.03.2006

IRL

Dialling tone audible but telephone will not dial: 

The connection is OK. Is the dialling mode set correctly 

Program external line prefixe.
The other party cannot hear you: Have you pressed the 

Mute key? Press the key again. Is the plug from the handset 

cord inserted correctly?
Recall key does not work: Set appropriate flash time.

Blank insert strips for the repertory keys can be found on the 

Internet at http://www.siemens.com/euroset.

If you should encounter any problems when operating the 

telephone connected to a communication system with 

analogue network access, please contact the network 

operator responsible or your dealer.

This device is intended for analogue phone lines in your net-

work.
Country-specific requirements have been taken into consid-

eration.
We, Siemens Home and Office Communication Devices 

GmbH & Co. KG, declare that this device meets the essential 

requirements and other relevant regulations laid down in 

Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is availa-

ble at this Internet address:

http://www.siemens.com/gigasetdocs.

Without prejudice to any claim the user (customer) may 

have in relation to the dealer or retailer, the customer shall 

be granted a manufacturer’s Guarantee under the condi-

tions set out below: 

◆

In the case of new devices and their components exhib-

iting defects resulting from manufacturing and/or mate-

rial faults within 24 months of purchase, Siemens shall, 

at its own option and free of charge, either replace the 

device with another device reflecting the current state of 

the art, or repair the said device. In respect of parts sub-

ject to wear and tear (including but not limited to, batter-

ies, keypads, casing), this warranty shall be valid for six 

months from the date of purchase. 

◆

This Guarantee shall be invalid if the device defect is 

attributable to improper care or use  and/or failure to 

comply with information contained in the user manuals. 

In particular claims under the Guarantee cannot be 

made if:

◆

The device is opened (this is classed as third party inter-

vention)

◆

Repairs or other work done by persons not authorised by 

Siemens.

◆

Components on the printed circuit board are manipu-

lated

◆

The software is manipulated

◆

Defects or damage caused by dropping, breaking, light-

ning or ingress of moisture. This also applies if defects or 

damage was caused by mechanical, chemical, radio 

interference or thermal factors (e.g.: microwave, sauna 

etc.)

◆

Devices fitted with accessories not authorised by Sie-

mens

◆

This Guarantee shall not apply to or extend to services 

performed by the authorised dealer or the customer 

themselves (e.g. installation, configuration, software 

downloads). User manuals and any software supplied on 

a separate data medium shall be excluded from the 

Guarantee. 

◆

The purchase receipt, together with the date of pur-

chase, shall be required as evidence for invoking the 

Guarantee. Claims under the Guarantee must be submit-

ted within two months of the Guarantee default becom-

ing evident. 

◆

Ownership of devices or components replaced by and 

returned to Siemens shall vest in Siemens.