Emerson E2 User Manual
10-20
•
E2 RX/BX/CX I&O Manual
Enter your license key to activate the desired feature:
Figure 10-34
- Enter Your Unique License Key
4.
Reboot the controller and open the License
Report screen again to see the license key appear
next to the activated feature (Figure 10-35):
Report screen again to see the license key appear
next to the activated feature (Figure 10-35):
Figure 10-35
- License Report Screen
10.15.1 Web Services
Web Services is a licensed feature that allows the user,
once the required license has been obtained and entered, to
view and adjust certain parameters in the E2 controller
through a Web page. The E2 Web Services feature enables
the user to:
view and adjust certain parameters in the E2 controller
through a Web page. The E2 Web Services feature enables
the user to:
• View site-specific information such site name, site
phone, local date and time.
• View the current version of the E2. This includes
the type of unit (e.g., RX-400) and the version of
the firmware.
the firmware.
• View global data values such as outside air tem-
perature and humidity.
• View a list of other networked area controllers at
the site, including version and controller type infor-
mation.
• Connect to the selected E2 for remote configuration
changes.
• Access Terminal Mode.
• View Alarms.
To access Web Services:
Open a browser window and enter the IP Address of
your E2 controller:
Figure 10-36
- E2 Web Services Page
10.16 Set Up Alarming
To set up alarms, open the Alarm Setup menu:
1.
Press
to open the Main Menu
2.
Press
(System Configuration)
3.
Press
(Alarm Setup)