Bravetti DO IT ALL 3 FP200 User Manual

unplugged from the electrical 
power source before changing 
attachments. Do not immerse the 
mixer gear box in water. 

1.  To attach the mixer gear box to the 

Power Pack, line up arrow on the 
Power Pack and Mixer Gear Box.  

2.  Push Power Pack onto Mixer Gear 

Box until seated.

3.  While grasping Mixer Gear Box rotate 

it 90º clockwise until the arrow on 

the Power Pack aligns with the 

“Square” on the Mixer Gear Box.

4.  To disassemble Mixer Gear Box and 

Power Pack rotate Mixer Gear Box 
90º counterclockwise.

unplugged from the electrical 
power source before changing 
attachments. Do not immerse the 

mixer gear box in water.

Select the desired attachment, either the 
Dough Hooks, Wire  Beaters or Whisk 
and assemble to Mixer Gear Box as 
noted below:
A)  Dough Hooks (2)

• 

Insert stem end of dough hooks 

(one at a time) into opening in  base 
of Mixer Gear Box. 

• 

Rotate slightly while pressing gently    

until dough hook “Clicks” into place.

• 

Repeat for second dough hook.

• 

Ensure that dough hooks are well 

seated in Mixer Gear Box.

B)  Wire Beaters (2)

Follow same installation procedure as 
above.

C)  Wire Whisk

This attachment is used for beating 
air into mixtures such as egg whites, 
yolks or creams..

• 

To install, place stem of Wire Whisk  

into either of the openings in the 
Mixer Gear Box.

• 

Rotate Wire Whisk while pushing 

gently until Wire Whisk “Clicks” into  
place.

• 

Ensure that Wire Whisk is well 

seated in Mixer Gear Box.

1.  After attaching the desired accessory 

into the mixer gear box, plug the 
mixer into power source.

2.  Hold the power pack with one hand 

and press and hold the On/Off switch 
with your index finger.

3.  Ensure that there are no obstructions 

and that the accessories are moving 
freely in the mixing container.

4.  When finished using the unit, unplug 

the unit before removing the 
accessories.

unplugged from the electrical 
power source before changing or 
cleaning attachments. Do not 
immerse the mixer gear box in water. 

1.  The unit and the various attachments 
should be cleaned after each use.
2.  All accessories and glass beaker can 
be cleaned with warm soapy water.
3.  Use a damp cloth or sponge to clean 
the housing of the power pack. Do NOT 
immerse in water or any other liquid.