Bosch HBL3350UC Quick Setup Guide

Page of 52
English 3
Dimensions for 27” 
Wall-Mounted Units
Single Oven 27”
It is good practice, when oven is installed at the end of a 
cabinet run, adjacent to a perpendicular wall or cabinet 
door, to allow at least 1/4” space between the side of the 
oven and the wall/door.
For oven support, install 2x4’s extending front to back flush 
with the bottom and the side of the opening. The supporting 
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be installed either above or below 
the unit. If the conduit box is installed below the unit, a 2” 
diameter hole or space is required between the back wall 
and the right rear of the 2x4 supports.
The cabinet base must be flat and capable of supporting a 
weight of at least 193 lbs (87 kg).
Double Oven 27”
It is good practice, when oven is installed at the end of a 
cabinet run, adjacent to a perpendicular wall or cabinet 
door, to allow at least 1/4” space between the side of the 
oven and the wall/door.
For oven support, install 2x4’s extending front to back flush 
with the bottom and the side of the opening. The supporting 
base must be well secured to the floor/cabinet and level.
Note: 
The conduit box must be located above the unit to facilitate 
connecting and servicing.
The cabinet base must be flat and capable of supporting a 
weight of at least 361 lbs (164 kg).
27 1/16”
(687mm)