Blaupunkt Car Stereo System 320 User Manual

6

 

쏅 Push the control panel into the bracket at the 

right edge of the device. 

 

쏅 Push the control panel carefully into the left 

bracket until it clicks into place.

 

쏅 Press the   button 

1

 to unlock the control 

panel.

The left side of the control panel detaches 
from the device and is secured by the bracket 
against falling out.

 

쏅 Move the control panel slightly to the left until 

it disengages from the right bracket.

 

쏅 Carefully remove the control panel from the 

left bracket.

Note:
The car sound system automatically switches 
off  as soon as the control panel is removed.

For the Toronto 420 BT, you can defi ne whether the 
language for messages on the display is English or 
German. The setting is performed in the user menu 
(see the chapter "User settings", section "Mak-
ing settings in the "DISPLAY" menu", menu item 
" LANGUAGE").

This car sound system is designed for operation in 
diff erent regions with diff erent frequency ranges 
and station technologies. The factory default of 
the reception area is "EUROPE". In addition, the 
reception areas "USA", "SOUTH AMERICA" and 
" THAILAND" are available.

Note:
If you operate the car sound system outside of 
Europe, you may fi rst have to set a suitable re-
ception area in the user menu (see the chapter 
"User settings", section "Making settings in the 
"TUNER" menu", menu item "TUNER AREA").

 

쏅 For switch-on, press the On/Off  button 

3

.

The car sound system switches on.

 

쏅 To switch off  the device, press and hold down 

the On/Off  button 

3

 for longer than 2 sec-

onds.

The car sound system switches off .

Note:
If you switch on the car sound system while 
the vehicle ignition is switched off , it auto-
matically switches off  after 1 hour to preserve 
the vehicle battery.

Switching on/off  via vehicle ignition
The car sound system will switch off /on simulta-
neously with the ignition if the device is correctly 
connected to the vehicle's ignition as shown in the 
installation instructions and you did not switch 
the device off  by pressing the On/Off  button 

3

.

Adjusting the volume
You can adjust the volume in steps from 0 (off ) to 
50 (maximum).

 

쏅 Turn the volume control 

4

 to change the 

volume.

Note:
If a telephone or navigation system is con-
nected with the car sound system as de-
scribed in the installation instructions (pin 
2 of chamber A), the car sound system is 
muted in case of a telephone call or naviga-
tion announcement so that you can hear the 
playback of the telephone or navigation sys-
tem undisturbed. During muting, the display 
shows "TELEPHONE".

 

쏅 Briefl y press the On/Off  button 

3

 to mute 

the car sound system or to reactivate the pre-
vious volume.

While it is muted, the display shows "MUTE".