Blaupunkt Car Stereo System 320 User Manual

8

The following memory banks are available in the 
diff erent reception areas:

Region

Memory banks

FM1, FM2, FMT, MW, LW

FM1, FM2, FMT, AM, AMT

FM1, FM2, FMT, AM, AMT

FM1, FM2, FMT, AM, AMT

 

쏅 Press the SRC button 

@

 repeatedly until the 

desired memory bank is displayed.

 • Up to 5 stations can be stored in each 

memory bank.

 • You can disable certain memory banks 

that you do not want to use (see chapter 
"User settings", section "Making settings 
in the "TUNER" menu", menu item "BAND 
 SELECTION"). Deactivated memory banks 
are skipped during the source selection 
with the SRC button 

@

.

There are various ways of tuning into a station:

 

쏅 Turn rotary control 

7

 one notch counter-

clockwise or clockwise to start station seek 
tuning.

The display briefl y shows "SEARCH AUTO". 
The radio tunes into the next receivable sta-
tion.

 • For the reception area "EUROPE": In the FM 

waveband, only traffi

  c information stations 

are tuned into if the priority for traffi

  c infor-

mation (

) is switched on. 

 • The sensitivity of seek tuning can be ad-

justed (see the chapter "User settings", 
section "Making settings in the "TUNER" 
menu", menu item "SENSITIVITY").

 

쏅 Press the rotary button 

7

 once to activate 

manual station tuning.

The display briefl y shows "SEARCH MANUAL".

 

쏅 Turn the rotary control  

7

 to change the fre-

quency in increments.

Note:
The manual station tuning is automatically 
exited approx. 15 seconds after the last fre-
quency change, and the station seek tuning is 
started by turning the rotary control 

7

.

 

쏅 Select the desired memory bank.

 

쏅 If necessary, set the desired station.

 

쏅 Press the station button 1 - 5 

>

 for approx. 

2 seconds to store the current station under 
the button.

- or -

 

쏅 Briefl y press the station button 1 - 5 

>

 to call 

up the stored station.

With the scan function, you can scan either every 
receivable station or every stored station of the 
current waveband.

Note:
You can adjust the scan time for each station 
(see the chapter "User settings", section "Mak-
ing settings in the "VARIOUS" menu", menu 
item "SCAN TIME").

 

쏅 Press the MENU button 

2

 for approx. 2 sec-

onds to start scanning.

During the scan, the display alternately dis-
plays "SCAN" and the current frequency as 
well as memory bank or station name. 

 

쏅 Briefl y press the MENU button 

2

 to con-

tinue listening to the station that is currently 
being scanned.