Blaupunkt AUSTIN CD41 User Manual
E-4
ENGLISH
FRAN
Ç
AIS
ESP
A
Ñ
OL
POR
TUGU
Ê
S
Mode Selector
Each time the
DISP
is pressed, the display window will change
over as shown below;
Display priority setting
Display Priority can be set for the following items;
Radio mode
• Frequency and Station Name, plus during
CDC (CD changer) mode
• Disc No, Track No, Track time and Disc name.
• Frequency and Station Name, plus during
CDC (CD changer) mode
• Disc No, Track No, Track time and Disc name.
Example
To set Station Name to the Display Priority.
To set Station Name to the Display Priority.
1.
Press the
DISP
three times, and the temporary display
appears in the display window.
2.
Hold the
DISP
pressed for more than 2 seconds.
“ NO NAME” or a previously assigned station name blinks
once to indicate that Station Name is selected for the Dis-
play Priority.
After 5 seconds, the display mode will automatically re-
turn to the Display Priority showing either “NO NAME” or
the station name.
once to indicate that Station Name is selected for the Dis-
play Priority.
After 5 seconds, the display mode will automatically re-
turn to the Display Priority showing either “NO NAME” or
the station name.
Tip
Frequency Display is initially set to the Display Priority,
and Station Name (“NO NAME”) is set to the “Tempo-
rary” indicator.
Frequency Display is initially set to the Display Priority,
and Station Name (“NO NAME”) is set to the “Tempo-
rary” indicator.
Adjusting the Sound Characteristics
1.
Press the
AUD
to select the desired adjustment mode
as follows;
2.
Rotate the dial to adjust the selected item.
Adjust within 3 seconds after selecting the item. After 3
seconds, the dial reverts to volume control. Use the fol-
lowing tables as a guide for adjusting the settings in each
mode.
seconds, the dial reverts to volume control. Use the fol-
lowing tables as a guide for adjusting the settings in each
mode.
Adjustment Range
BASS
BASS -5
BASS +5
TREBLE
TREBLE -5
TREBLE +5
LOUDNESS
LOUD OFF
LOUD ON
BALANCE
L9 R0(Full left)
L0 R9(Full right)
FADER
R9 F0(Full rear)
R0 F9(Full front)
Tip
Settings for BASS, TREBLE, LOUDNESS and XBASS can
be made to each of the following modes independently:
Settings for BASS, TREBLE, LOUDNESS and XBASS can
be made to each of the following modes independently:
FM, AM, CD Changer and AUX.
Switching the Source (Selecting auxiliary
input)
input)
You can connect the auxiliary equipment (Portable cassette
player, MP3 player, etc.) to this radio via optional AUX-IN cable.
(See page 11)
player, MP3 player, etc.) to this radio via optional AUX-IN cable.
(See page 11)
Each time the
CD
is pressed, the operation source will
change over as shown below;
Press the
BND / TS
to return to tuner mode.
Note
If the
If the
CD
button is pressed when no CD has been loaded
into the unit, The CD mode will skip to the CD changer mode
or AUX mode.
Also, if the CD changer is not connected, the system will move
across to the AUX mode regardless of whether auxiliary equip-
ment is connected or not (“MP3/AUX” will be displayed.)
It is not possible to switch to the AUX mode when the CD
changer is connected.
or AUX mode.
Also, if the CD changer is not connected, the system will move
across to the AUX mode regardless of whether auxiliary equip-
ment is connected or not (“MP3/AUX” will be displayed.)
It is not possible to switch to the AUX mode when the CD
changer is connected.
Remote Control (Optional)
You can operate your receivers basic AM, FM, CD & CDC
features via an optional IR Remote Control. Optional Credit
Card type remotes are available. See dealer to order RC823
Credit Card remote.
features via an optional IR Remote Control. Optional Credit
Card type remotes are available. See dealer to order RC823
Credit Card remote.
Priority
STN CALL LEVEL 1
CLK ADJ
METER 1
CLOCK 12
MESSAGE
Temporary
(NO NAME)
(NO NAME)
BASS 0 TREBLE 0 LOUD OFF (LOUDNESS)
L0 R0 (BALANCE)
R0 F0 (FADER)
CD
CD changer or AUX
AUSTIN CD41
01.3.22, 1:45 PM
4