Behringer Digital Mixer X32 User Manual

X32 DIGITAL MIXER Preliminary User Manual

(16)

(23)

(20)

(26)

(25)

(17)

(22)

(27)

(21)

(19)

(18)

(15)

(24)

(15) 

PUSH ENCODERS – These 6 controls adjust the parameters presented at 

the bottom of the Main Display. The editable function will show a circular 

icon in the display when continuous control is available. The function will 

show a broad rectangular icon to indicate that a switch or toggle can be 

accessed by pushing the encoder. 

(16) 

LAYER BUTTONS – Some screens in the Main Display have more than 

6 editable parameters which can be accessed by pressing the Layer Up or 

Down buttons. 

(17) 

PAGE SELECT BUTTONS – Use these to scroll through the available screens 

or to confirm/decline certain actions. 

(18) 

MAIN/SOLO METERS – The main stereo output level is displayed here 

along with the solo level of all channels whose Solo button is active. 

(19) 

CATEGORY SELECT BUTTONS – Press one of these buttons to jump directly 

to the subject you wish to edit or configure. 

(20) 

MONITOR LEVEL – Adjust the level of the Monitor outputs with this knob. 

(21) 

PHONES LEVEL – Adjust the volume of the headphone outputs, 

located inside the left and right side caps. 

(22) 

MONITOR MONO – Press this button to monitor the audio in mono. 

(23) 

DIM – Press this button to reduce the monitor volume. Press the 

View button to adjust the amount of attenuation along with all other 

monitoring-related functions. 

(24) 

LAMP INPUT – Connect a standard 12 V, 5 Watt gooseneck lamp here. 

(25) 

TALKBACK INPUT – Connect a talkback mic via standard XLR cable to 

this input. 

(26) 

TALK LEVEL – Adjust the level of the talkback mic with this knob. 

(27) 

TALK A/B – Select the destination for the talkback mic signal with these 

buttons. Press the View button to edit the talkback routing for A and B.