Wyse X90e User Manual

To install the 1-GB or 2-GB flash and 1-GB RAM Upgrade Kit in an X90 or X90e mobile 
thin client:

Follow all precautions listed in the Quick-Start Guide that came with your 
mobile thin client for disconnecting and reconnecting the mobile thin client.

1. Perform a proper shutdown of the mobile thin client by closing all files and ending your 

session, and then press the power button to turn off the mobile thin client.

2. Unplug the power cord and power adapter, and remove any other cables from the 

mobile thin client prior to disassembly. 

3. Position the mobile thin client face down, and then using a small Phillips screwdriver 

remove eight (8) screws from the bottom of the unit as indicated in Figure 5.

4. Using a flat edge tool, preferably plastic, insert its tip in the depressed area as shown 

in Figure 6 and carefully lift up the cover to remove.